Payment & Shipping Terms:
|Weight:||2.05kg||Applications:||Uninterruptible Power Supplies • Alarm Systems • Cable Television • Communications Equipment • Control Equipment • Emergency Lighting Systems • Fire & Security • Geophysical Equipment • Marine Equipment • Medical Equipment • Power Tools • Computers • Elec|
|Designer Life:||5 Years(25℃）||Case:||ABS|
|Discharge:||-20~60°C||Quality:||Stable Quality & High Reliability|
|Technology:||AGM Valve Regulated Sealing Technology||Multipurpose:||Float Or Cyclic Use|
|Fully Charged Battery 77°F(25°C):||40 MΩ||20 Hour Rate:||7Ah|
|Positive Plate:||Lead Dioxide||Negative Plate:||Lead|
|Nominal Voltage||12V||Capacity||C20||7Ah (10.5V, at 25℃)|
|Nominal Capacity (C20)||7Ah (10.5V,at 25℃)||C10||6.3Ah (10.5V, at 25℃)|
|Dimension||Length 151mm||C3||5.25Ah (10.5V, at 25℃)|
|Width 65mm||C1||4.2Ah (10.2V, at 25℃)|
|Height 95mm||Internal Resistance||Approx. 25 mΩ (25℃)|
|Total Height 101mm||Max Short-duration Discharge Current||210 A(25℃)|
|Weight||Approx. 2.0527 kg||Terminal||F1|
Sealed and maintenance free, safety, no leakage
ABS containers and covers optional
Safty valve installation of explosion proof
High quality and reliability
Exceptional deep discharge recovery
Flexible design for multiple installation
Wide operating temp. range
High capability, high energy density
More deep cycle times
Long service life, Excellent recharge and discharge performance
Sealed and maintenance free operation.
Non-Spillable construction design.
ABS containers and covers optional.
Safety valve installation for explosion proof .
High quality and high reliability.
Exceptional deep discharge recovery performance.
Low self discharge characteristic.
Flexibility design for multiple install positions.
The unique construction and sealing techniques ensure no electrolyte leakage
from case or terminals.
Electrolyte Suspension System
All batteries utilize an electrolyte suspension system consisting of a high
porosity, glass fiber material which in conjunction with plates, totally absorb and
contain the electrolyte.
JP batteries incorporate a built-in design that controls gas generation and
induces recombination of more than 99% of gases generated during float or
Maintenance Free Operation
There is no need to check specific gravity of the electrolyte or add water to
batteries during float service life. In fact, there is no provision for this type of
Low Pressure Valve Regulated System..
All batteries are equipped with safety release valves, designed to operate
between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is
never an excessive accumulation of gas within the battery.
Heavy Duty Grids
Heavy duty lead calcium tin alloy grids provide an extra margin of performance
and service life in either float or cyclic applications.
Cyclic Service Life
More than 600 discharge/recharge cycles can be realized from Jopower JP and JPH
batteries, dependent on the average depth of discharge.
Float Service Life
Self Discharge - Shelf Life
The self discharge rate at room temperature is approximately 3% of rated
capacity per month.
Jopower Batteries may be operated over a broad range of ambient temperatures.
The batteries are manufactured using a range of terminals which vary in size
and type. Please refer to details as shown
Don’t near the hot source and don’t under the sunshine.
Don’t charge in the sealed container.
No short circuit. It should be addition charge if you don’t use, and single charge
per three months, to avoid irreversible sulfating. The battery should be changed
when the battery jar broken or the electrolyte omitted, to avoid acid corrosion.
Don’t store in the space of acid gas.
You should be careful and regular check when use the battery. To avoid the
battery don’t work. You should change the battery if the capacity is not full or has
been damage, especially after one year using.
Don’t put the battery in the fire, or it will explode.
Please use cotton cloth to clean, if the battery is broken down and leak
electrolyte. Please wash your skin when touch the electrolyte.
Don’t clean the battery by using the organic solution. (e.g. petrol)
ging time: 15~20h; Temperature compensation coefficient: -5mV/℃/cell.
Contact Person: Thomas